![]() They all work without a problem, and I assume all my other drives that I used with my old backup system will work fine as well. What I can say for sure is that I took my chances and ordered a Seagate Exos X16 (16 TB) drive for use as a backup drive and it works perfectly in the dock! I've also used it with a 3 TB Seagate Barracuda and a 3 TB Western Digital Caviar Green drive. Slightly confusing if they mean up to 18 TB (as in "no more than 18 TB") or if drives beyond 18 TB can be used as well. supports 3.5 and 2.5 SATA 6Gb/s drives and should be able to support up to 18TB HDD." My rack-mounted drive bay was limited by the chips used in the Firewire-SATA interface (and couldn't be upgraded) so I contacted OWC about this and they responded " The USB-C Dual Bay solution should be able to handle up to 18TB+ drives." and in another mail said ". The specs don't say anything about this, and the user-manual only says "Supported drives: any 2.5" or 3.5" SATA drive". Excellent!Īs mentioned earlier, one of my main reasons for looking into a new dock solution was because my old setup didn't take the newer, larger drives (i.e. It goes without saying that you should take care when inserting and removing a drive from the dock (as to not damage it's (or the dock's SATA and power connectors), but I've always taken care, even with my sled-based dock, so I don't see this as a problem.Īnd the OWC dock also takes 2.5" as well as 3.5" sized drives! This is great if you want to prepare (or clone) a laptop drive on another machine instead of having to first place it inside an external 2.5" drive enclosure. Not needing a sled also comes in handy if you for instance need to prepare a drive for later to be permanently installed inside a computer or another enclosure of some kind. Each bay is covered by a spring-loaded "door" by the way, which is a nice touch to keep dust away from its SATA connectors. Simply press the bare drive into its SATA connectors to attach it, and likewise to remove it you carefully pull the drive upwards. Not so when using high capacity hard drives with this dock -there simply isn't any permanent mounting of the drives to be done. the screw holes no longer match that of older drives) because of the larger platters inside you'd be getting problems if newer sleds aren't available or the ones you have cater for all SATA drives (for my Mac Pro I had to buy new drive sleds (also from OWC by the way) in order to remedy this. And since newer high capacity drives have a different screw mounting layout than all previous drives (i.e. Without any sleds to mount it's so easy to just insert/remove a bare drive, so it's no problem exchange drives quickly, and you don't need to buy expensive and sometimes hard to find sleds for a particular type of dock. Yes, it "only" has room for two SATA drives (not four as with my Proavio Studiorack) but actually I seldom need to access 4 drives at once. ![]() The OWC dual drive dock ticks off just about all my boxes and more! Read on. Firewire 800 was fine for me (as the Mac Pro has those ports) but newer computers don't, so it was time to look for something else. This has resulted in many physical drives laying around which means more physical space needed and more hassle finding and inserting/removing drives whenver I need to backup.Īnd any new drives need to be mounted (with screws) in a new drive sled, so I had to buy a bunch of those as well. ![]() this setup worked well for years, but as my storage needs have grown I've outgrown that rack solution because it only takes 2 TB or 3 TB (I forget which) drives or smaller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |